After the Christmas and New Year holidays pass, I like to transition our décor to a winter theme. Normally, this simply means keeping everything out except for the Christmas tree, stockings, Santa figurines, and most of the sparkly items. Not too much work!
I realized last year I didn’t have a good winter wreath to hang, so thought ahead and made one this year! Using old clothing in my DIY projects is something I really enjoy and want to do more of, so I chose to get creative with some Goodwill sweaters in colors matching some of the exterior features of our home.
Here’s what you’ll need to make your very own cozy winter wreath:
I started by attaching the greenery to the frame. The greenery I used was a little unconventional. I found five felt placemats at Goodwill that worked great. I poked the greenery through the frame and attached each one to the wire of the frame with a twist tie, reinforcing the tie with some hot glue.
Then I planned out the placement of the ornaments. I only had small and large ornaments to use (I was trying my best to use leftover supplies from the basement), but I’d encourage you to use a medium size ornament as well. I think it would give the wreath more balance, transitioning from large to small a little less drastically!
Once I had a good idea of how many ornaments I would need, I began attaching the sweaters to the ornaments. I did this by simply gathering the sweater around the ornament, placing a twist tie around the top, twisting it tightly, and cutting away what I gathered from the sweater. Not very technical…but it worked really well without needing to measure and I had more than enough material to work with. Once the ornament was cut away from the sweater, I reinforced the twist tie all the way around the top of the ornament with hot glue.
Next was getting the ornaments on the frame. I chose to use safety pins to attach the twist tie end of the ornament to the wreath frame. I made sure to loop the pin through the fabric AND the wires of the frame to make sure they were secure. I attached the large ornaments first and proceeded around the frame with the small ornaments.
To secure the ornaments even more, and make them fall where I wanted them positioned, I went around the frame with jute. At the very top, I chose to loop the jute around the frame tightly to add a little open space. I dabbed the ends of the jute with hot glue so they would hold strong.
Because with this method you can see the bottoms/twist tie ends of some of the ornaments, I cut off a long strip from one of the sweaters and wove it like ribbon through the wreath. It worked perfectly in covering up what I didn’t want others to see! I attached the sweater ribbon with safety pins on the back side of the frame.
I’m a perfectionist that loves good balance, but there is something about the off balance look of this particular wreath that I really enjoy. Like I said earlier, if you have medium sized ornaments to incorporate, I think that would help with balancing this type of wreath out. Or you could use the same size ornament all the way around! Use what you have and get creative.
If you are interested in other projects I’ve done using old clothing, check out my no sew cloth pumpkins!