• The Country Wren's Nest
  • Wandering Wren
  • DIY
  • Fashion
  • Wren Picks
  • About
  • Contact
The Country Wren's Nest
Busy Hands, Happy Heart

Outdoor Wooden Christmas Tree

11/28/2016

0 Comments

 
I searched and searched for Christmas ideas for the decorative area I have on top of the hill as you turn into our driveway. I didn't find a solution that 100% worked for/spoke to me, so I combined some of the visuals I saw into a project that was the best fit for our space.

I ended up drawing inspiration for this project from a pallet Christmas tree I saw and made one out of wood lath instead.

Here's what you'll need:
  • 4 ft. Wood Lath (Bundle of 50 is $12.97)
  • Pencil
  • Circular Saw
  • Washrag
  • Gorilla Glue
  • Clamps
  • Outdoor Paint
  • Large Paint Brush
  • Metal Wire (We Used 20 Gauge)
  • 3-4 ft. Metal Ground Stake

I started out by taking a piece of lath to the space I wanted to put the Christmas tree in and marking the width of how long the bottom piece should be with a pencil. Once I had the bottom piece marked, I planned to mark each piece of lath 1/1.5 inches in from the first mark (and so on) as I worked my way to the top of the tree.

I laid out my lath one piece at a time, starting with the bottom and started measuring/marking where my cuts would be. You'll need a good amount of floor space. 
Picture
Picture
Note the pencil marks on the lath. This is where I made my cuts.
Once I had each piece marked, I cut the lath using a circular saw.
Picture
Picture
As I cut each piece, I made sure to stack them back in the same order.
Picture
Once I was finished with the "branches" of the tree, I used another piece of lath to create the "trunk." I sawed a point on the bottom of the trunk to help secure it in the ground when it came time.
Picture
Because lath is pretty lightweight, I chose to simply glue the branches to the trunk. I used Gorilla Glue, which is extremely strong glue. With this type of glue, it is important to get the surfaces that you are gluing together wet first. I used a damp washcloth.
Picture
Picture
Picture
Also, with Gorilla Glue you are encouraged to clamp items together or use another type of heavy pressure to press items together. I clamped the top piece and used full paint cans down the center to press down on the rest of the lath. It worked really well.

I let this project dry overnight and painted it the next morning. I used a green, matte, outdoor paint. I dressed it up a little more by adding some dots to mimic lights or ornaments with yellow, high gloss, outdoor paint.
Picture
We bought a metal stake to reinforce the tree and used 20 gauge metal wire to attach the tree to the stake. We pounded both the stake and the tree into the ground before connecting with the wire. You can also see in the photo below that the Gorilla Glue expands really nicely to ensure a good bond.
Picture
Here's the final product! I ended up adding a red bow to the top for an additional pop of color and to tie it more closely to the decor I put in the wheelbarrow. 
Picture
0 Comments

Decorative Holiday Sign

11/28/2016

0 Comments

 
The approaching Christmas holiday inspired a few decor ideas in our household. The project I'll talk about in this post could be used for decorating your home or as a gift for someone else!

What you'll need:
  • Thin, Lightweight Piece of Wood
  • Pencil
  • Paint (Any Type Works)
  • Small Paint Brush
  • 3M Adhesive Strips with Velcro

I salvaged a piece of wood that is around 36 inches long for this project.
Picture
I chose a phrase that was not holiday specific so leaving it up throughout the winter wouldn't be an issue. I like winter decorations vs. Christmas decorations when I can help it to give the decor longer life. 

I wrote the phrase I chose out with pencil on the piece of wood before I began painting to ensure the spacing and positioning turned out right.
Picture
Once I had the phrase as I wanted it on the wood, I used a small paint brush and white paint to trace the pencil lines. After letting the paint dry, I hung the sign up with 3M adhesive strips with Velcro so I didn't damage the wall/create unnecessary holes for something I knew would only be up for a few months.

This project took me less than 10 minutes to complete and cost me $0 because I had the supplies I needed on hand. If you needed to purchase supplies, it would easily run under $15, much less than what you would pay for an already completed sign like this in a store. Doing it yourself allows you to choose the saying, create the look, and have a personal connection to the piece - which makes it even more special if you choose to give something like this as a gift to someone you care for!

Here's the finished product in its wintertime space, just below the "clothespin line" I will hang our Christmas cards from:
Picture
0 Comments

    Archives

    July 2020
    February 2020
    November 2019
    September 2019
    August 2019
    July 2019
    June 2019
    May 2019
    April 2019
    March 2019
    December 2018
    October 2018
    July 2018
    June 2018
    April 2018
    February 2018
    January 2018
    November 2017
    October 2017
    September 2017
    August 2017
    July 2017
    June 2017
    May 2017
    April 2017
    January 2017
    December 2016
    November 2016
    October 2016
    September 2016
    August 2016
    July 2016
    June 2016
    April 2016
    March 2016
    December 2015

    Categories

    All
    Christmas
    Date Night
    DIY
    Dogs
    Dollar Tree
    Gardening
    Gift
    Hobby Lobby
    Home Decor
    Home Depot
    Interior Design
    Landscaping
    Light Fixture
    Menards
    Modern
    Paint
    Renovation
    Rustic
    Target
    Travel
    Woodworking

    RSS Feed

Proudly powered by Weebly
  • The Country Wren's Nest
  • Wandering Wren
  • DIY
  • Fashion
  • Wren Picks
  • About
  • Contact